LENCO 27470 QW-470 QUICK WIRE  FOR PULLING CLAW

PART # QW-470  # 27470

LENCO LITERATURE

Lenco A-144 Spot Welding Tip

The A-144 Regular tip is used for normal panel replacement procedures. Place an A-144 tip in each electrode and weld-two spots at a time one side.

Comes in a pack of 10 tips ( 5 sets)

Free shipping in the 48 states

Lenco A-145 Drip Rail Thin Shank

Tip is used when spot welding drip rails, trunk gutters and other areas that are too narrow for the normal tip.  ( PAIR)

 SHIPPING $ 7.00 IN THE 48 STATES

Lenco A-200 Stud Welding Tip

This tip is used to weld a # 10 round head screw to a panel. These studs can be used for pulling dents , hanging upholstry , etc.

Insert the screw threads into the hole of he A-200 tip , place the head of the screw against the metal and then weld (Pack of 3)

Shipping $ 7.00 in the 48 states

Lenco A-202 Washer Welder Tip

The A-202 washer welder is a slotted tip which accepts standard USS 1/4" washers.

Place a washer in the slot of the tip , position the washer in the crease to be pulled , and then weld. After pull is made, the washer may be easily twisted off the panel.( 3 tips)

Shipping $ 7.00 in the 48 states

Lenco A-203 Swivel Ground Tip

This tip is used with the other A-200 Series special tips to complete the curcuit so that one spot at a time can be made . The A-203 is placed in the switchless electrode.

Package of 2(two)

SHIPPING $ 7.00 IN THE 48 STATES

Lenco Adapter Kit # 27215, is necessary for adapting the 3000 and 5000 Lenco spot welders in order to use the Lenco Ini-Spot III QPK-20 and A-260 cable assembly.

The adapter kit includes the male amd female receptacles and any internal components necessary.

FREE SHIPPING IN THE 48 STATES

Lenco  AP-3000 Aluminum Dent Pulling Sysyem

Lenco # 20830

AP-3000

• Welds 10-24x1" aluminum stud for pulling
• State-of-the-art solid state controls
• Light weight design and easily portable
• 10 'welding amd 10' ground cables
• Comes with a package of studs
• Weld stud on .040 to 1/4" material
• Shipping weight 55 lbs
• Power cable 25'
• Amperage requirement 10 amps
• Voltage 115 volts ac

Lenco Conversion Kit CK-35

This will upgrade your 3000 and 5000 Lenco spot welders to be compatable with lenco's L-4000 lencospot .

Your welder will then accept lenco QPK-20 , L-950 and A260 attachments.

Free shipping in the 48 states

Lenco HP-2010 Portable Dent Pulling System

Part # 20810

120 volt model

T handles can be used for short controller pulls

Lightweight , padded grip for comfortable

Can shrink light gauge metals

Available with 120 or 230 voltages

10' welding & 7; ground cable leads

Shipping weight is  64 lbs.

25' power cable

LENCO L-4000 AUTOBODY SPOT WELDER

BRAND NEW

 THE LENCOSPOT® MARKII® Autobody Dual-Spot Welder

With the LENCOSPOT® MARKII® Welder, you can make factory type spot welds in the shop. It's simple to operate...simply press the two electrode guns against the work, press the button and the welder does the work. Two spot welds every time.

Time of the welds are automatically controlled by solid state electronic circuitry. No guess work...no gasses or wire to buy...no warpage...no flame...and perfect welds time after time, panel after panel. It is the perfect answer to lower the ever rising labor costs.

Lencospot Mark II The Lencospot Mark II Autobody Dual-Spot Welder Offers All These Features:

        Features & Benefits:

FREE SHIPPING IN THE 48 STATES

LP-2000 LENCOPULL®

The LP-2000 LENCOPULL® has its own designed transformer which operates off 130VAC. It comes complete with an 8' power cable slide hammer and an 8' ground cable assembly. The lightweight cable assemblies allow easy use on automobile tops, hoods, and side panels. Time of the star tips welds are controlled by solid state electronic circuitry.

The LP-1000 has a 25' input power cable, metal shrinking tip (a-201), allen wrench and extra package of star tips (10).

Star stud welds directly to workpiece with built in puller.

No more draw pins to buy. no more holes to drill.

Can shrink light gauge metal.

Can make multiple pulls without changing tools.

Less operator fatigue.

lighter weight.

Easy to operate.

Required less pressure to attach star tip.

Less heat input needed to attach star tip.

Manufactured in U.S.A.

New designed head configuration

allows the operator to use a metal

shrinking tip (A-201) in addition to

pulling dents with the star tip.

SHIPPING IS FREE THE 48 STATES

Lenco HP-2010 Portable Dent Pulling System

Part # 20710

230 volt model

T handles can be used for short controller pulls

Lightweight , padded grip for comfortable

Can shrink light gauge metals

Available with 120 or 230 voltages

10' welding & 7; ground cable leads

Shipping weight is  64 lbs.

25' power cable

Lenco Magnetic Base QP-465

 For use with the QPK-20 or LP-1000 or on most ground clamps(Ground Clamp Extra).

 Free Shipping in the 48 states

Lenco Panelmaster Resistance Spot Welder LPM-8

Lenco 20610

The Panelmaste is the latest and most powerful in LENCO'S line of resistance spot welders. This unit incorporates a water circulator ad radiator for cooling the transformers, welding lads and tips.

• Generates 8,000 amps.
• Clamping force of 550 lbs.
• maximun welding capacity of 3 pc. 18 gauge
• Mounted on easy movable cart
• Has one sided spot welding gun
• 14" long reach arms
• Wheelhouse electrode arms
• Primary voltage is 208/230 single phase 50-60 hz . 60 amps
• Shipping weight 285 bs.
• 25' power cable

Lenco QC-460 Quick Claw Kit # 27469

Includes,(2) welding tips # A-204, Quick wire 1/2 lb. and Quick Claw Puller.

 Free shipping in the 48 states

Lenco Quick Pry # QP466

For increased Leverage withn the QPK-20 or the LP-1000. Aluminum Construction for light weight with uncompromising strength.

Multiposition footpad allows for a varity of pulling angles.

FREE SHIPPING IN THE 48 STATES

Lenco Quick Pull Kit QPK-20

Autobody Dent Pulling Attachment Elininates Several Steps Saves Time - Increases Profits No more holes to drill No more long studs No more washers Star Tip Welds directly to workpiece with built in puller

The QPK-20 Attachment comes complete with a 7' power cable,slide hammer and 7' ground clamp/magnetic cable assembly, metal shrinking tip,(A201), allen wrench,and a package of star tips (10).

The qpk-20 Attachmeent is for use with any Lenco Spot Welder. Free shipping in the 48 states

Lenco Service cart # 22150

Built for service , designed to make your job easier and more efficient. You can elevate your lenco Spot Mark II Welder to the proper height for spotting tops, and yet it will be low enough to easily spot in a wheel housing .

Bring your tools to the job ,everything you need on the job is at your fingertips.

The Service Cart is made of heavy gauge steel and has two heavy duty 8" wheels on the back. Casters with bearings on the front make it easy to move to the job.

Free shipping in the 48 states

Lenco Spot Welder Cable Set 10" A-260-15

Gives the owner of a Panelspotter or lencospot Welder a Brand New Cable Set with new handles , switch and tips.

Will also fit other brand Spot Welders with plug change
we also carry these cables in 5' & 10'

FREE SHIPPING IN THE 48 STATES

Lenco Spot Welder Cable Set 5" A-260 # 29130

Gives the owner of a Panelspotter or lencospot Welder a Brand New Cable Set with new handles , switch and tips. Will also fit other brand Spot Welders with plug change
we also carry these cables in 10' & 15'
FREE SHIPPING IN THE 48 STATES

Product #:	ET 103
Product Name:	Lenco Spot Welder Tip Kit
Description:	Lenco Spot Welder Tip Kit. The ET-103 Spot Welder Tip Kit gives the owner of a Panelspotter or LencoSpot welder an ample supply of new regular and drip rail tips. It also includes special tips for dent pulling, metal shrinking and stud welding. These regular and special tips not only let you use your welder for body metal replacements but turn it into an everyday tool for additional applications. Kit includes the following: Two (2) A-144 Regular Welding Tips; Two (2) A-145 Drip Rail Welding Tips; One (1) A-200 Stud Welding Tip; One (1) A-201 Metal Shrinking Tip; One (1) A-202 Washer Welding Tip; One (1) A-203 Swivel Ground Tip; One (1) STSW Holder Cleaning Brush; One (1) SPK-102 Long Stud Welding Tip; One (1) SPK-103 Molding Rivet Welding Tip. SHIPPING IN THE 48 STATES IS $ 8.00

Lenco Tip Sharpener # 21020

Sharp Tips make better welds. Sharpen your tips on the job without removing the tips from the electrode, centering the tip. pply pressure turning clockwise amd the tool steel blade will sharpen the copper tip to its origional 1/8" diameter.

Free Shipping in the 48 states

Lenco Uni-Spot III # L-950

Attach the Uni-Spot III to your Lenco Series Resistant Welder.

There is no need to disconnect the dual-spot cable assembly when using the UNI-SOPT III attachment with your Lenco spot welder. You will need to connect the trigger switch plug on the attachment you wish to use.

There are no consumables to buy, no shop air, no gas, no wire, no special training.

Eliminate warpage, distoration, reduce cleanup, welds two combined pieces of 18 gauge auto body stock.

Pinch type welds from both sides are ideal for : Drip Rails, Door Openings, Truck Lips, Roof Skins.

FREE SHIPPING IN THE 48 STATES